DG200 Series
User’s Guide
31
Click
Add
to add a rule of Incoming IP Filtering.
Check
Remove
and click
Remove
to remove the specified entry.
Figure 41: Add - Incoming IP Filter Setup
Global Setting
Enter the
Filter Name
Select the
Protocol
from the selection list.
Enter the
Source IP Address
and
Subnet Mask (range of IP addresses)
of packet
Enter the
one port or multi ports
(port range)
Enter the
Destination IP Address
and
Subnet Mask (range of IP addresses)
of packet
Enter the
one port or multi ports
(port range)
Select the
WAN interfaces
which will be applied with this incoming IP filter rule.
Click
Save/Apply
