DG200 Series
User’s Guide
59
Enter the
SIP Listen Port Number
which is a port number of UDP or TCP, default is
5060.
Enter the value for
Maximum Redirect
which is the number that VoIP packet may allow
to redirect or forward to.
Enter the
Failover retrial
which service provider requests to retransmit if there is no
response received.
Enter the
External SIP IP address
and
Port number
.
Enter the
Keep-alive Interval
which the device will send packet to SIP server to keep the
connection alive.
Enter the
SIP Proxy IP address
if required.
Enter the value of
Session Expires
in seconds. The device will close the session in
seconds after the call is disconnected.
Check to enable
Session Timer
feature
Click
Start SIP Client
to activate SIP service.
Click
Stop SIP Client
to stop SIP service.
Click
Restore Default Setting
to restore system default SIP settings.
Check
Apply
to save the configuration.
