DG200 Series
User’s Guide
72
Global Setting
Select to
Enable Log
function or not
Select
Log Level
from the list
Select
Display Level
from the list
Select
Mode
from the list
Click
Save/Apply
to save the configuration.
TR-069 Client
This page allows you to access TR-069 ACS (Auto-Configuration Server). The ACS can
provision, configure, and diagnostic the device from remote site.
Figure 99: Management Configuration – Firmware Upgrade
Global Setting
Select to
Enable
or
Disable
to send
Inform
packet to ACS.
Enter the
Inform Interval
number of seconds. The Inform packet will be sent to ACS
periodically.
Enter the
ACS URL
to reach ACS
Enter the
ACS User Name
and
Password
Enter the
WAN interface
used by TR-069 client to send TR-069 packets
Select to
Enable
or
Disable
to send the TR-069 SOAP messages to serial console port.
This is usually used for trouble shooting purpose.
Check to enable
Connection Request Authentication
Enter the
Connection Request User Name
and
Password
Click
Save/Apply
to save the configuration
