29
Cleaning the Unit
1. Turn unit off and disconnect the lead wires from
the unit.
2. Clean the device after use with a soft, slightly
moistened cloth and wipe gently.
• Do not use chemicals (like thinner, benzene).
• Do not let water get into the internal area.
NOTE:
This device and accessories (including the
electrodes) do not require sterilization.
Cleaning the Electrode Pads
1. Turn the power off and remove the lead wires
from the electrodes.
2. Wash the electrodes when the adhesive surface
becomes dirty and/or the electrodes are difficult
to attach to the skin.
Washing the Electrode Pads
• To “wash” the electrodes, place a small drop of
water on your clean fingertip and rub the water
across the entire gel surface. Place the gel
adhesive face up and let it air dry until the water
is absorbed and has been reconstituted. Do not
wipe with a tissue paper or cloth. If the electrode
still does not stick properly, replace them with
new electrodes (E201-6R).
CLEANING AND STORAGE