25
How To Align The Running Belt
EN
During running or walking, the left and right foot may exert different force to the running belt. This will cause the running belt to run
“off—centred”. Intenza Treadmills are designed, and built, to ensure proper belt tracking that will automatically “re—centre”. Occasionally,
the belt may need further adjustment to keep it centred. To centre the belt, use the “T” wrench, provided with the product, to adjust the
rear roller position.
RUNNING BELT CENTREING PROCEDURE
1
Never turn the bolts more than 1/ 4 turn at a time.
2
Always tighten one side and loosen the other to prevent over tightening the belt.
3
Turn on the treadmill. Adjust belt while the treadmill is running at 4mph (6.4 kph) with no person on the running belt.
PLEASE NOTE
1
After adjustment, walk on the belt for 5 minutes to test.
2
If the belt still slips, repeat the procedure but do not turn the bolts more than 1/ 4 turn at a time.
3
Over tightening the belt can significantly shorten the belt life.
IF THE BELT IS TOO FAR TO THE LEFT SIDE
IF THE BELT IS TOO FAR TO THE RIGHT SIDE
1
Turn the left roller bolt 1/ 4 turn clockwise (to tighten).
1
Turn the right roller bolt 1/ 4 turn clockwise (tighten).
2
Turn the right roller bolt 1/ 4 turn counterclockwise (to loosen).
2
Turn the left roller bolt 1/ 4 turn counter clockwise (loosen).
Intenza Treadmills Manual_____Maintenance_____How To Align The Safety Belt
