AMP FAULT DETECTOR
6
AFD-6218
Front Panel
Front Panel
1. tESt BUttOn (nORMAL AMP)
It is the button used when testing the amp in each channel manually.
2. StAtUS LED (nORMAL AMP)
It displays each amp’s status.
GREEN : Normal
RED : Fault (LED will brink if the channel is replaced with spare.)
3. tESt BUttOn (SPARE AMP)
It is the button used when testing the spare amp manually.
4. StAtUS LED (SPARE AMP)
It is the LED which displays the status of spare amp
다
.
GREED : Normal
RED : Fault
5. BUzzER OFF / tESt ALL BUttOn
When this button is pressed in a short time, buzzer will be off.
When this button is pressed in a long time, fault will be check (All channel).
6. POWER LED
It will be on if power is supplied.
1
3 4
5
6
2
