6CD CHANGER PLAYER/1CD PLAYER/STEREO TUNER
14
CD-660/610, TU-610
CD Player Common Matters
CD Player Common Matters
- RANDOM Function
1. This function is used if desiring to randomly listen to songs in the current disc.
2. Pressing the RANDOM button during stop, "RANDOM" is displayed in the display window and songs
are played randomly if pressing the (
) (Play/Pause) button.
3. Repeat play is also available according to Repeat mode.
4. Press the RANDOM button once again if desiring to cancel Random function.
- Song Introducing Function (INTRO SCAN)
1. This function is used for introducing only the first part of song for 10 minutes.
2. "INTRO" is indicated in the display window if pressing the INTRO button during play, and songs are
from the next song to the order for 10 seconds.
3. This function is released if pressing the INTRO or ( ) (Stop) button.
- PROGRAM Function
For initial setting
1. Pressing the PROGRAM button in stop status, "PGM-01 D1 T-00" is displayed on the display
window. (For the CD-610, only "PGM-01 T-00" is displayed.)
1) "PGM-01" represents address to store after programming.
2) "D1" represents disc number for the CD-660, and you can select D1 ~ D6 by pressing the Disc Skip.
3) "T-00" represents disc number within disc and you can select desiring song by using the (
) button.
2. Pressing the PROGRAM button after setting item 1) ~ 3), program memory for a music is completed.
3. Program memory is available up to 24 songs by repeating above method.
4. Continuously pressing the PROGRAM button to check memorized contents, memory status is shown
to the order.
5. This mode is released if pressing the Stop ( ) button.
6. Pressing the (
) (Play/Pause) button after pressing the PROGRAM button, programmed songs are
played to the order.
For program change
1. Pressing the PROGRAM button in stop status, current memory status is displayed.
2. Select program number to change by pressing and holding the PROGRAM button.
3. Select music to change by using the (
) (Skip) button. (For the CD-660, it firstly selects
and shows the relevant disc by using the Disc Skip button.)
4. Pressing the PROGRAM button, change is completed, and pressing the Stop ( ) button, this function
is released.
* To clear a programmed music, select it by pressing the PROGRAM button. If pressing the CLEAR
button, it is cleared soon.