POWER DISTRIBUTOR
3
PD-6359
Features
Features
- RACK SYSTEM POWER CONTROL
It controls the power of the rack system.
- AC OUTLET TERMINAL
It consists of UNSWITCHED 1 group and SWITCHED 3 group, and in case of SWITCHED 3, it will be on/off for
every 2 seconds with sequential power.
- SUPPLY EMERGENCY POWER
It can supply the battery power to the unswitched power output terminal, so it will be switched to emergency
power in case of black out to supply the DC power to the system.
- MONITORING OF VOLTAGE SUPPLYING STATUS
The status of service voltage can be monitored through Windows program.
- REMOTE CONTROL
Power can be on/off from Windows program, and it can be controlled through the contact of remote terminal
without PC.
- AC/DC VOLT METER
The status of service voltage can be monitored through front LED display consisting.
Caution when assembling the RACKs
Caution when assembling the RACKs
- When using this device, exclusive model for our rack should be installed.
- If you decide to use the components made of other company, rated capacity should be verified, and confirm it
with an authorized dealer near by.
- Rated capacity should be verified.
- Connecting it while power is off.
- Connect AC and DC powers based on the power of the device to be connected.
- When supplying the rack power, interlock AC OUTLET(Switched: 3 Group/Unswitched: 1 Group) and DC
power output (DC 24V, 5A) should be less than rated outputs.
