SMART A/V MIXER
112
VMX-1104
Added video is video of the channel setup as channel setup of the edit screen menu as shown in [Fig.
VII-23]. Clicking other channel before adding video to other area enables to change the video channel to
appear on the relevant area.
To represent video of the desiring channel at the desiring position with a keypad, move the area setup
box as shown in the left of [Fig. VII-20] by using , , and buttons to the desiring posi-
tion, and enlarge or reduce the size of the vertical direction area by using + , + , and
enlarge or reduce the size of the horizontal direction area by using the + , + buttons.
In the status setup desiring area, represent video as shown in [Fig. VII-22] by using . It is also possi-
ble to change video to appear in the selected area by selecting the desiring channel before adding mage
to other area by using the , , , and buttons which are current channel selection
buttons.
[Fig. VII-23] Channel setup of the edit screen menu
Number Keypad in Edit Screen
Since the number keypad is used for moving the boxes for edit screen adjusting of the size in
special function of edit screen, it no operates as function to enter unique number of the transition
pattern.
Cautions in Setup of Edit Screen Area
If setting is done so that each area is folded when setting more than 3 edit screen areas, video of
the folded part is flickering as broken. This is resulted from that frame rate is fallen when setting
more than 3 areas and is not failure. It is recommended to use edit screen function by setting the
each area so that folding will not occur.
Special Ef
fects