![background image](http://html1.mh-extra.com/html/inter-m/vmx-1104/vmx-1104_manual_2075639026.webp)
SMART A/V MIXER
22
VMX-1104
Connection of CVBS(Composite Video Base Band Signal) Video Source to Channel 3 and Channel 4
To connect video source of the CVBS format to the channel 3 of the VMX-1104, connect the CVBS
output socket of video source to the S-video channel 3 input socket of the VMX-1104 video-in using
dedicated RCA cables for the RCA as shown in the below [Fig. IV-7].
[Fig. IV-8] shows a pattern that the output terminal of video is made of a BNC jack if using video
source of same CVBS format as [Fig. IV-7]. In this case, connect the terminal using the BNC-to-RCA
connector as shown in figure.
[Fig. IV-7] Connection of CVBS Video Source to Channel 3
[Fig. IV-8] ] Connection of CVBS Video Source to Channel 4
Operation Method