![background image](http://html1.mh-extra.com/html/inter-m/vmx-1104/vmx-1104_manual_2075639041.webp)
12. Provide Video Effect to Input Video
If properly setting connected input video through previous steps and optimizing video, it means that
preparation of broadcasting by giving video effect or by performing transition effect using the VMX-
1104 is completed. In this section, we will describe about method of giving video effect to each channel.
Give BLACK&WHITE Effect to Channel 1
- Select Channel 1 to Current Channel
To give BLACK&WHITE effect to the channel 1, you must firstly setup to current channel 1. Select the
channel 1 as current channel by clicking
clickin
of the channel 1 with a mouse or press the
chanl
equivalent to channel 1 of the current channel buttons located at the front top.
- Perform BLACK&WHITE Effect
Click the checkbox equivalents to the black & white as shown in [Fig. IV-30] after activating the effect
menu in order to perform the black & white effect with a mouse.
In order to perform the BLACK&WHITE effect with a keypad, perform BLACK&WHITE effect at a time
pressing the
move
or move the cursor to SINGLE PIP activating the effect menu using the
the
or the
th
then press .
SMART A/V MIXER
37
VMX-1104
[Fig. IV-30] Performance of BLACK&WHITE Effect
Operation Method