Eng.
What's In The Box
M200 Media Player
Micro USB Cable
USB Power Adapter
HDMI Cable
Installation Guide
Installation
1. For power, connect the micro USB cable to the M200.
2. Connect the other end of the micro USB cable to the TV’s USB port or to
the USB power adapter and plug the adapter into outlet.
3. Connect the included HDMI cable to the M200 and to one of your TV’s
HDMI ports.
4. Select the correct TV input source for your TV via TV’s remote control.
5. M200’s initial wizard will display on your TV.
6. Use the remote control to control the M200.
* The remote is IR based (Infrared), thus, the remote will need to be
pointed towards the M200 in order to function properly.
Initial Wizard
Language
1. Select your desired language, then select Next to go to the next step.
Display Mode
1. Select a display mode compatible with your TV (720p@60Hz is set by
default), then select Next to go to the next step.
Wi-Fi Network
1. Select your own listed Wi-Fi network. Enter the password if applicable.
2. If successfully connected, a check symbol will appear to the left of your
Wi-Fi network name.
3. You are now connected to Wi-Fi. Select Next to go to the next step.
* The M200 will auto memorize the last Wi-Fi connection. If using a new
Wi-Fi connection, you will need to reconnect the M200.
Miracast Mirroring
* Miracast requires Android 4.2 or higher.
1. Press Fn on the remote to access Miracast. The M200 is now ready to pair.
2. On your mobile device, scan for available devices through the Miracast
wireless display function (check your device’s user manual).
3. The mobile device will detect the usable devices. Select M200v5 (default
system name).
4. After connecting, the mobile device and your TV will work synchronously.
* If you do not want the mobile device and the screen to stay
synchronized, select the disconnect icon.
