47
MO
VING O
N
Eclipse Associate Display and Basic Digital Phone User Guide
To set up remote messaging:
1.
Access your mailbox as described on
2.
Press
to select the Personal Options Menu.
3.
Press .
NOTE:
This option is not available if you do not have Remote Messaging enabled.
4.
Press
to set up a primary cascade or press
to set up an alternate cascade. A
prompt tells you what the cascade’s current status is.
5.
Do one of the following.
•
To program a cascade level:
Press
and enter the number of the level you
wish to program (1-9). You then have the following options:
—
To enable or disable the cascade level:
Press
. (You cannot enable the
level until a notification number is programmed.)
—
To set up or change an
extension or telephone
number:
Press
. Then
press
for an extension number or press
for an outside number.
Then enter the number.
—
To set up or change a
pager
number:
Press
. Then enter the number.
•
To set up time of day for notification:
Press
. Then enter the time you
want the message notification to start and stop. Enter the times with two dig-
its for the hour and two digits for the minutes (e.g., 0915 = 9:15). If entering
the time in 12-hour format, you are prompted to press
for AM or press
for PM.
NOTE:
For 24-hour notification, program the starting and ending times to be
the same.
•
To set up the days of the week for notification:
Press
. Then select one
of the following:
— Press
for Monday-Friday.
— Press
for all days.
— Press
to select individual days. You are prompted to press digits 1-7
which correspond to the days Sunday through Saturday.
•
To select all or priority-only message notification:
Press
. Then press
for all messages or
for priority messages only.
6.
Either select another option, as described above, or press
to save the settings
and exit.
4
5
1
2
1
1
2
1
2
3
2
1
2
3
1
2
3
4
1
2
#
