DANGER:
To reduce the risk
of electrical shock
Always unplug massager from the electrical outlet immediately
after using and before cleaning.
Do not reach for an appliance that has fallen into water.
Unplug immediately.
WARNING:
To reduce the risk of burns,
fire, electric shock or injury to persons
An appliance should never be left unattended when plugged in.
Unplug from outlet when not in use, and before putting on or
taking off parts.
Do not operate under blanket or pillow. Excessive heating can
occur and cause fire, electric shock, or injury to persons.
Close supervision is necessary when this appliance is used by,
on, or near children, invalids, or disabled persons.
Use this appliance only for its intended use as described in this
manual. Do not use attachments not recommended by the
manufacturer.
Never operate this appliance if it has a damaged cord or plug,
if it is not working properly, if it has been dropped or damaged,
or dropped into water. Return the appliance to a service center
for examination and repair.
Always keep the power cord away from heated surfaces.
Never operate the appliance with the air openings blocked.
Keep the air openings free of lint, hair, and the like.
Never drop or insert any object into any opening.
Do not use outdoors.
Do not operate where aerosol (spray) products are being used or
where oxygen is being administered.
To disconnect, turn all controls to the OFF position, then remove
plug from outlet.
Do not massage abdomen when pain is present or if you are pregnant.
Do not massage any area of the body that is swollen, inflamed or
covered with skin eruptions. Do not use on unexplained calf pain.
Do not use massager when standing on a damp floor, or when any
part of the body is in contact with plumbing or any similar ground.
Always connect massager to a properly grounded electrical outlet.
This unit is designed to operate on standard 120 Volt 60 Hz house current.
Do not use unit if noise above normal sound is heard.
The unit is designed for personal in-home use. Commercial use will
void warranty.
Important Safety Instructions
Read all instructions before using the HTT-9C/HTT-9CP.
WARNING:
Do not put hands or fingers near
the massage mechanism or rollers while the HTT-9C/HTT-9CP
is running. Touching the mechanism can result in injury
from the rollers squeezing together.
SAVE THESE INSTRUCTIONS
6
Grounding Instructions:
This product must be grounded. If it should malfunction or
breakdown, grounding provides a path of least resistance for
electrical current to reduce the risk of electric shock. This product
is equipped with a cord having an equipment-grounding conductor
and a grounding plug. The plug must be plugged into an appropriate
outlet that is properly installed and grounded in accordance with
all local codes and ordinances.
WARNING:
Improper connection of
the equipment-grounding conductor can
result in a risk of electronic shock. Check
with a qualified electrician or serviceman if
you are in doubt as to whether this product
is properly grounded. Do not modify the
plug provided with the product – if it will
not fit the outlet, have a proper outlet
installed by a qualified electrician.
This product is for use on a normal 120-volt circuit and has a
grounding plug that looks like the plug illustrated in sketch (A).
A temporary adapter that looks like the adapter used in sketches
(B) and (C) may be used to connect this plug to a 2-pole receptacle
as shown in sketch (B), if a properly grounded plug is not available.
The temporary adapter should be used only until a properly
grounded outlet (sketch A) can be installed by a qualified
electrician. The green colored rigid ear, tab or the like extending
from the adapter must be connected to a permanent ground such as
a properly grounded outlet box cover. Whenever the adapter is used,
it must be held in place by a metal screw.
WARNING:
Your chair is equipped with a thermal
resetting protection device. This is an added safety feature to
protect you and your massage chair from overheating. If the chair
should suddenly stop and will not start, turn the main power
switch, located on the back of the chair, off and do not operate the
chair for at least 30 minutes. Failure to turn the chair off may
result in the chair starting unexpectedly when the device cools.
For all grounded cord-connected products:
Grounding methods:
7
GROUNDED
OUTLET
GROUNDED
OUTLET
BOX
METAL
SCREW
TAB FOR
GROUNDING SCREW
ADAPTER
(B)
(A)
(C)
GROUNING
PIN
