13
12
www.ijoy.com
TAKE
CARE AND MAINTENANCE
General Maintenance
1. Be sure to disconnect the power cord from the electrical outlet before cleaning.
2. Do not use benzene, thinner or any other solvents on your massage chair.
3. Remove dust on the backrest or armrest with a vacuum.
4. If the backrest or a armrests become soiled, wipe with a damp cloth, then a dry cloth.
5. Common upholstery cleaners may be used for tough stains.
6. When cleaning the controller or around the power switch, use a dry cloth only. Never use a damp cloth to clean the controller or power switch.
7. It is suggested that you cover the chair when not in use for a long period of time.
8. The mechanics of this product are specially designed and constructed to be maintenance free. No periodic lubrication or servicing are required.
9. Foreign objects should not be inserted between the massage nodes or the unit housing.
10. When not in use for a long period of time, we recommend that the power cord be coiled and that the unit be placed in an environment free of dust and moisture.
11. Do not store near heat or open flame. Do not leave this product exposed to direct sunlight for long periods of time. This may cause fading or damage.
To keep your product working and looking its best, please follow these simple care guidelines.
Want a stronger massage?
You can easily remove the massage-
softening pad that comes preinstalled
in your iJoy
®
massage chair. But
keep it handy, in case you want to
replace it in the future.
FOR A
STRONGER MASSAGE
Your iJoy
®
chair may have zippers that are closed
with a plastic Security Tie. Cut the Security Tie with
a nail clipper or other suitable instrument. Take
care to not cut the chair upholstery.
1. Flip the head pillow over the headrest, to the back of the chair.
2. Open the two backrest zippers most of the way down the backrest; do not detach the backrest pad from the backrest.
3. Pull the backrest pad outward, then open the zippered pocket inside.
4. To install the massage-softening pad:
a. Insert the pad into the zippered pocket and attach the top of it to the pocket using the hook and loop fasteners.
b. Smooth the pad downward until it is flat.
5. To remove the massage-softening pad, detach the hook and loop fasteners at the top of the pad, then carefully remove the pad.
6. Close the zippered pocket and the two backrest zippers.
7. Flip the head pillow back over the headrest and push down on the lower corners to secure it.
The massage-softening pad softens the massage intensity. For a stronger massage, remove the massage-softening pad.
Hook and loop fasteners
