Submaster Control Trigger
When a DMX Trigger is set to the
Submaster Control
type, the incoming DMX channel value is directly
mapped to control the Submaster of a Playback Fader.
This type of trigger is best used when it is desired to have an external console directly control the
Submaster level of one of CueServer’s Playback Faders.
When editing an
Submaster Control
trigger, the editor panel will appear similar to this example:
The following properties can be set for an
Submaster Control
trigger:
•
Properties
◦
Number
– The numerical order of the trigger in the list. This number can be changed to replace
an existing trigger or to organize triggers numerically.
◦
Name
– A name for the trigger. This field can be freely set to any text.
•
Trigger
◦
Channel
– The channel that is being observed for the trigger. A value from
1
to
16384
may be
entered into this field. The channel number corresponds to the
global
channel number within
CueServer, not a local channel number in a single universe.
◦
Type
– The type of the DMX Trigger. Set to
Submaster Control
for this type of trigger.
◦
Submaster
– The number of the Playback Fader’s Submaster to control. A value from
1
to
32
may be in this field.
Interactive Technologies, Inc.
CueServer 2 User's Manual - 18.5.18
Page 122 of 429
