Group
Syntax
Command
Description
Return Value
Group <number> [<range...>]
Select one or more channel groups The selected channels’ value
Abbreviation
GR
or
U
Description
Selecting Groups
The
Group
command selects one or more DMX channels in the currently active playback fader that were
stored in the specified group resource. Use the
Group
command in conjunction with an action command like
,
,
,
,
,
,
or
to set channel levels, change the enable or parked
state of channels, or release them. When used alone or in logic expressions, the
Group
command returns
the current value of the specified channel(s).
Either a single group number can be specified, or a range of groups can be specified using the various
like +, -, > and ~.
Examples
Group 1
Selects the channels in group 1. Future action commands will be directed towards these channels. Also
returns the selected channel’s current value between
0
and
255
, or
-1
if the channels are released and/
or mixed in value.
Group 1+5 At 33
Sets the channels in groups 1 and 5 to 33%.
@Group 2+5 Park
Parks the channels in groups 2 and 5.
Interactive Technologies, Inc.
CueServer 2 User's Manual - 18.5.18
Page 157 of 429
