Update Group
Syntax
Command
Description
Return Value
Update Group <group number>
Updates group
group number
The group number updated
•
<group number>
◦ Any whole number from
0
to
99999
Abbreviation
UP U
or
UP GR
Description
The
Update Group
command updates the channels in a group to the currently selected channels.
If no group with the group number exists, a new group will be created. Use this command to change the
DMX channels stored in a group without loosing any of the other properties recorded in the group (such as
the name).
If no group with the group number exists, a new group will be created. If a group with the group number
already exists, only the group’s channels will be updated by using this command. All other group parameters
will not be affected.
Examples
Update Group 1
Stores (updates) the currently selected channels into Group 1.
Channel 1>10
Update Group 2
Stores (updates) Channels 1 through 10 into Group 2.
Interactive Technologies, Inc.
CueServer 2 User's Manual - 18.5.18
Page 257 of 429
