Network Properties [net]
This request sets various Network properties.
URL:
/set.cgi?dst=net&<optional-parameters>
Optional Parameters:
•
name=<string>
(optional)
◦ This parameter (if present) sets the device’s name.
◦ Maximum length of this string is 15 characters.
•
ipA=<ipAddress>
(optional)
◦ This parameter (if present) sets the device’s primary IP Address.
•
subA=<ipAddress>
(optional)
◦ This parameter (if present) sets the device’s primary subnet mask.
•
dhcpA=<0,1>
(optional)
◦ This parameter (if present) sets the device’s primary DHCP Mode.
◦ This parameter may be set to
0
or
1
.
•
ipB=<ipAddress>
(optional)
◦ This parameter (if present) sets the device’s secondary IP Address.
◦ This parameter is of no use on a device with a single Ethernet port.
•
subB=<ipAddress>
(optional)
◦ This parameter (if present) sets the device’s secondary subnet mask.
◦ This parameter is of no use on a device with a single Ethernet port.
•
dhcpB=<0,1>
(optional)
◦ This parameter (if present) sets the device’s secondary DHCP Mode.
◦ This parameter may be set to
0
or
1
.
◦ This parameter is of no use on a device with a single Ethernet port.
Interactive Technologies, Inc.
CueServer 2 User's Manual - 18.5.18
Page 334 of 429