15
o
Coil Roofing Nailer
Drives Coil Roofing Nails (¾" to 1¾" / 19 to 45mm)
Model No. CRN45-15
Item No. 65510
4
Interchange Brands
Operator’s Manual
Tool Information
Nailer Specifications: CRN45-15 Coil Roofing Nailer
Tool Dimensions -
Length x Height x Width
12-3/8" x 10-5/8" x 4-5/8"
﹙313mm x 271mm x 116mm﹚
Weight
5 .67 lbs . ﹙2 .58 kgs .﹚ Aluminum Body
5 .17 lbs . ﹙2 .35 kgs .﹚ Magnesium Body
Magazine Capacity
120 Nails
Recommended Operating Pressure
70 to 120 psi / 5 to 8 .5 kgs .
Applications
Fastening Asphalt and Fiberglass Shingles; Fastening Lath Wire on Plywood; Siding
Installation and Wooden Box Assembly .
Nail Specifications
WARNING:
Be sure to use only the genuine nails recommended for the CRN45-15 .
The use of any other nails can result in tool malfunction, leading to serious injuries .
Only the nail sizes shown in the table below can be driven with this nailer .
FASTENERS:
Wire Welded Nail Length
3/4" to 1-3/4" / 19 to 45mm
Shank Diameter
0 .120" / 3 .05mm
Head Diameter
0 .413" / 10 .5mm
Shank Type
Smooth, Ring
DIMENSIONS OF FASTENERS:
15˚ Coil Roofing Nails - Wire Weld Collated
0 .120"
3 .05mm
3/4"
to 1-3/4"
19mm
to 45mm
0 .413"
10 .5mm
Shank Type
Nail
Shank
Head
Smooth or Ring
Length
Diameter
Diameter
