15 Ga. Angled Finish Nailer
Drives 34˚ Finish Nails (1-1/4" to 2-1/2" / 32 to 65mm)
Model No. NF6515-34
Item No. 65420
3
Interchange Brands
Operator’s Manual
Important Information
WARNING:
The warnings, cautions and instructions discussed
in this instruction manual can not cover all possible conditions and
situations that may occur . It must be understood by the operator
that common sense and caution are factors which can not be built
into this product, but must be supplied by the operator .
When using the tool, basic safety precautions should always be
followed to reduce the risk of personal injury and damage to equipment .
Read and understand tool labels and operating instructions, safety precautions and
warnings in this manual before operating or maintaining this nailer .
Failure to follow warnings could result in
DEATH or SERIOUS INJURY .
Most accidents that result from the operation and maintenance of nailers are caused
by the failure to observe basic safety rules or precautions . An accident can often
be avoided by recognizing a potentially hazardous situation before it occurs and by
observing appropriate safety procedures .
Basic safety precautions are outlined in the
“SAFETY” section of this Manual and in
the sections which contain the operation and maintenance instructions .
Hazards that must be avoided to prevent bodily injury or tool damage are identified as
DANGERS
or
WARNINGS
on the nailer and in this Manual .
Never allow the nailer to be operated by children or individuals who have not reviewed
this manual .
OpERAtE thE NAIlER AccORDING tO thIS mANuAl.
WARNING!
■
Always follow the tool manufacturer’s safety and
maintenance instructions .
■
Always wear safety glasses with side shields when operating
or servicing tools .
■
Always disconnect the air supply from the tool and empty the
magazine when servicing tools .
!
!
SAVE THIS MANUAL
FOR FUTURE REFERENCE!
