15 Ga. Angled Finish Nailer
Drives 34˚ Finish Nails (1-1/4" to 2-1/2" / 32 to 65mm)
Model No. NF6515-34
Item No. 65420
6
Interchange Brands
Operator’s Manual
Safety Information
Important Safety Instructions for
Operating Nailers
READ ALL INSTRUCTIONS
1.
OPERATORS AND OTHERS IN WORK AREA MUST WEAR SAFETY
GLASSES WITH SIDE SHIELDS.
Danger to the eyes exists due to the possibility of flying fasteners
and debris when operating the nailer . To guard against these
hazards always wear safety glasses with side shields to protect both
the front and sides . Make sure others in the work area wear safety
glasses, too .
Eye protection equipment must conform to the requirements of
American National Standards Institute, ANSI Z87 .1 .
The employer is responsible to enforce the use of eye protection equipment by the tool
operator and other personnel in the work area .
2.
EAR AND HEAD PROTECTION MAY BE NEEDED IN SOME
ENVIRONMENTS.
Some work areas may include exposure to high noise levels which
can lead to hearing damage . Always wear ear protection to protect
your ears from loud noise . Wear head protection to protect your
head from flying objects .
3.
KEEP FACE, HANDS AND FEET AWAY FROM FIRING HEAD
AT ALL TIMES.
Never place your face, hands or feet near the firing head .
4.
KEEP FINGER AWAY FROM TRIGGER WHEN NOT DRIVING FASTENERS
TO AVOID ACCIDENTAL FIRING.
Always carry the nailer by the handle only . Never carry the nailer with your finger
on the trigger since you could drive a fastener unintentionally and injure yourself
or someone else .
5.
NEVER POINT NAILER AT YOURSELF OR OTHERS IN WORK AREA.
Respect the nailer as a working implement . Always assume the nailer contains
fasteners and never point the nailer at yourself or others, whether or not it
contains fasteners . If fasteners are mistakenly driven, it can lead to severe
injuries . Never engage in horseplay with the nailer .
6.
DRESS PROPERLY.
Do not wear loose clothing or jewelry as they can be caught in moving parts .
Rubber gloves and nonskid footwear are recommended when working outdoors .
Wear protective hair covering to contain long hair .
7.
KEEP VISITORS AWAY.
All visitors should be kept safely away from work area and should not handle the
nailer .
8.
KEEP OUT OF REACH OF CHILDREN.
9.
DO NOT OVERREACH.
Keep proper footing and balance at all times .
!
