ADAPTATION OF THE SEAT SHELL TO THE PATIENT
27
E
ng
lis
h
just so far that the connection can be moved
(Photo
3
)� Then loosen the bur-type connec-
tion of the seat upholstering (Photo
4
), and
then you can set the depth of seat to the di-
mension desired�
Tighten the screws again and fasten the seat
upholstering by means of the bur-type tape�
Upon completion of all setting works check
all connections for firm fit�
Attention:
Alterations as to fit, clinical pic-
ture or the like may only be performed by the
competent specialized company!
5
.
3
Adjustment of backrest height
Loosen the four setscrews for the adjust-
ment of the height of seat on the rear of the
seat shell by means of a hexagon socket
screw key just so far that the connection
can be moved (Photo
5
)� Then loosen the
bur-type connection of the back upholster-
ing (Photo
6
)�
Following that, you can set the height of
seat to the dimension desired and tighten
all screws�
Upon completion of all setting works check
all connections for firm fit�
4
6
5
3
