38
OPERATION AND ASSEMBLY
First, extend the spring-loaded
catch mechanisms (Fig�
10
) and
turn them
90
degrees� Set the back
end of the seat shell interface on
the front side of the adapter recep-
tacle, trapezoid-shaped; then slide
the seat shell until it stops at the
back and secure it with the spring-
loaded catch mechanisms (rotate
through
90
degrees so you hear it
snap into place)� Finally, check the
seat shell and the seat shell locking system to ensure they are secure�
Removing the seat shell
First, extend the spring-loaded
catch mechanisms and turn them
90
degrees� Then slide the seat
shell forward and remove it (Fig�
11
)�
7
.
2
Adjusting the inclination of the
seat shell (tilt-in-space mecha-
nism)
Due to inclination adjustment of the
seat shell the stability of the MINY
is only guaranteed if the tilt stop
system is extended�
The MINY is equipped with a gas-
pressure spring for the inclination
of the seat shell� In order to adjust
the inclination of the seat shell,
proceed as follows:
Activate the parking brakes
Pull the gas-pressure spring
release lever (Fig�
12
) mounted
to the right of the push bar frame�
10
11
12
