PEX-400111
Environmental Specifications
Use this product only under the conditions as shown below.
Environmental Conditions
Operating temperature: 0 degrees C to 50 degrees C
Relative humidity: 20% to 90% (non-condensing)
Dust
Typical office environment
Corrosive Gas
None
Noise
Keep this product away from power source such as motors as far as possible
to avoid electromagnetic interference.
Voltage Requirements
+3.3 Vdc (+/-0.3 V): 0.5 A (typ.)
Bus Requirements
PCI Express
TM
Base Specification Rev. 1.0a x1
Interface Module Dimensions
MD1: 106.68 (D) x 64.4 (H) [mm]
Number of Slots Required
1 slot
Periodic Inspections
The following inspections should be carried out on this product periodically.
Item
Checkpoint
Cable connections
Be sure that all connectors and cables are installed correctly.
Card edge
Check for dirt or corrosion.
Connector contacts
Check for dirt or corrosion.
Interface module surfaces
Surface should be free of dust and foreign matter.
Storage
This product should be stored exactly the same way as when it was received. Proceed as follows:
electro-conductive
bag
1. Put this product back in its electro-conductive bag.
box
2. Wrap this product with the original packing material.
3. Do not expose this product to the direct rays of the sun. Avoid excessive
humidity. Store the product at room temperature.
The shape differs depending on the product.
Interface Corporation
-
4
-
