F121 Studio Light Instruction
Thank you for purchasing the Interfit F121 flash light with touch screen. It benefits
from several features including; a large power output and built-in regulating circuit,
which can ensure stepless dimming and accurate colour temperature. The output of
the modelling lamp can be adjusted independently or in line with the flash tube
power adjustment. It has fast recycling speed and accurate power adjustments. It
benefits from touch screen controls and can be triggered remotely using the Interfit
on-camera remote INT910 (Sold separately). Please read these instructions before
using the Interfit F121. Thank you.
Function instruction
A. sensor
I. power switch
B. beep indicator
J. sync socket
φ
3.5
C. modelling lamp indicator
K. decrease power button
D. modelling lamp mode button
L. test button
E. flash tube power display
M. recycling indicator
F. beep on/off button
N. wireless channel/sensor
selection button
G. increase power button
O. channel indicator
H. power socket
P. sensor indicator
Operation Instructions
1. Please ensure the power switch is in the OFF position before connecting the
power lead. Once connected, change the power switch to ON and the unit will
power up.
2. Once the unit has finished charging, the OK indicator will be lit. Then press the
Test Button [L] to test the flash.
