7
Please note:
The cylinder is delivered fully preassembled.
On delivery, the knob module is in the factory state and must be programmed before
initial operation/installation. In this regard, see the
Service Device
instructions for use.
All of the described proceedings always relate to a programmed knob module.
In the version for Mifare transponders, the knob must be "woken up" by turning it on
before every step.
Installation of the Cylinder Body
Important:
Before assembling the knob module, always check the freedom of movement of
all components.
Step 1:
Remove the fixing screw and dismantle the existing cylinder body.
Step 2
: Insert the cylinder body and secure it with the fixing screw.
Installation of the Knob Module (with Disassembly
Card)
Step 1:
"Wake up" the knob module by turning it.
Step 2:
Hold the disassembly card in front of the knob module.
Knob module switches to disassembly mode.
Step 3:
Insert the knob module into the cylinder body while turning it.
C
H A P T E R
2
Installation/Dismantling
Summary of Contents for IF15x
