48
7. To partition the disk drive space, reboot the system into Windows NT and run Disk
Administrator.
02. New Configuration
Use the New Configuration option in the DACCF Main Menu to configure the drives in the
disk array for the first time, or to establish a new configuration. This option overwrites the
existing configuration with the new configuration. When you select New Configuration, the
following menu displays.
MYLEX Disk Array Controller-Configuration Utility Version X.XX X/XX/XX
2 Channel - 7 Target DAC960P #1 Firmware version x.xx
Choose this option to create, arrange, or cancel one or
more packs and also to view information on the physical
drives connected to the adapter.
New Configuration
1. Define Pack
2. Define System Drive
Use Cursor keys for selection, hit <ENTER> to select, <ESC> to Exit
NOTE
Use New Configuration with caution, or you will lose an existing configuration.
Define Pack
Use Define Pack in the New Configuration menu to set up physical drives into packs, cancel
and arrange existing packs. When you select Define Pack, a display similar to the following
appears.
Summary of Contents for InterRAID-12
