![background image](http://html1.mh-extra.com/html/intergraph/rax-hd/rax-hd_user-manual_2076455038.webp)
30
You must set the HD video output format so Frame Wrangler will produce video output that the
HD equipment connected to the system will accept. The HD Output Configuration dialog displays
each time you start Frame Wrangler until you configure the HD video output format.
You can change the settings in the HD Output Configuration dialog later, if needed. To do this, go
to Configure » HD Output on Frame Wrangler's Main Panel (see Chapter 4, “Getting to Know
Frame Wrangler”).
Finding Frame Wrangler and Video File Explorer
Frame Wrangler and Video File Explorer are both available from the operating system Start menu:
♦
To find Frame Wrangler, go to Frame Wrangler in the Frame Wrangler program menu.
♦
To find Video File Explorer, go to Video File Explorer in the Frame Wrangler program menu.
For detailed information on Video File Explorer, see Video File Explorer Help.
Reinstalling and Reconfiguring System Software
If you have to reinstall or reconfigure the base unit operating system or any of the base unit
hardware drivers, see the System Guide delivered with the system.
If you have to reinstall or reconfigure RAX HD Animation Recorder software, including Frame
Wrangler software, see Chapter 6, “Rebuilding System Software.”
Summary of Contents for RAX HD
