System Requirements
Your switch is designed to operate with a variety of platforms, operating
systems and network cards. Actual performance will depend on a
combination of these components. Differences in performance can occur
depending on the versions and types of platforms, operating system and
network cards used.
The minimum system requirements are:
•
Clients running Windows 98/ME, NT4.0, 2000/XP, Vista, MAC OS9 or
later, Linux, UNIX or other platform compatible with TCP/IP protocols.
•
Workstation installed with Ethernet NIC (Network interface Card)
•
Serial Port connection (Terminal)
•
Above PC with COM Port (DB-9)
•
Ethernet Port connection
•
Network cables - Use standard network (UTP) cables with RJ45
connectors
•
Above PC installed with WEB Browser and JAVA runtime
environment Plug-in
Note:
We recommend using Windows XP or Windows 7 with Internet
Explorer 6.0 or above for access to the switch management setup.
Wiring the Power Units
The 6-contact terminal block connector on the top panel of Managed
Industrial Switch is used for two DC redundant power inputs.
Note:
This product is intended to be supplied by a UL Listed Direct Plug-In
Power Unit marked "Class 2" or "LPS" and output rated 48 VDC, 380 mA
minimum.
Please follow the steps below to insert the power wire.
1. Insert the positive/negative DC power wires into the contacts 1 and 2 for
POWER 2, or 5 and 6 for POWER 1.
2 of 13
P/N 1069666-EN • REV 1.01 • ISS 14JUL10
