Figure 6: IP information screen
Configure IP address
1. On the "Switch# " prompt, type "
configure
" to enter the configuration
mode.
2. On the "Switch(config)# " prompt, enter the following command and
press <Enter>. As show in Figure 7.
Switch(config)# ip address 192.168.1.100 255.255.255.0 192.168.1.1
The previous command will apply the follow settings for the Managed
Industrial Switch.
• IP:
192.168.1.100
•
Subnet Mask: 255.255.255.0
• Gateway:
192.168.1.1
P/N 1069666-EN • REV 1.01 • ISS 14JUL10
7 of 13
