manualshive.com logo in svg

Interlogix IFS NS3550-24T/4S, User Manual

The Interlogix IFS NS3550-24T/4S is a cutting-edge network switch - a reliable and high-performance solution for seamless data transmission. For a comprehensive understanding of its features and settings, users can conveniently access the detailed User Manual. It is available for free download at 88.208.23.73:8080, offering valuable resources at your fingertips.

Share
Download
background image

 

 
 

142

 

Path Cost

 

Controls the path cost incurred by the port. The 

Auto

 setting will set the path cost 

as appropriate by the physical link speed, using the 802.1D recommended 
values. Using the 

Specific

 setting, a user-defined value can be entered. The path 

cost is used when establishing the active topology of the network. Lower path cost 
ports are chosen as forwarding ports in favor of higher path cost ports. Valid 
values are in the range 1 to 200000000. 

 

Priority

 

Controls the port priority. This can be used to control priority of ports having 
identical port cost. (See above). 

Default:

 128

  

Range: 0-240, in steps of 16 

 

operEdge (state flag) 

Operational flag describing whether the port is connecting directly to edge 
devices. (No Bridges attached). Transitioning to the forwarding state is faster for 
edge ports (having operEdge true) than for other ports. 

 

AdminEdge 

Controls whether the operEdge flag should start as beeing set or cleared. (The 
initial operEdge state when a port is initialized). 

 

AutoEdge 

Controls whether the bridge should enable automatic edge detection on the 
bridge port. This allows operEdge to be derived from whether BPDU's are 
received on the port or not. 

 

Restricted Role 

If enabled, causes the port not to be selected as Root Port for the CIST or any 
MSTI, even if it has the best spanning tree priority vector. Such a port will be 
selected as an Alternate Port after the Root Port has been selected. If set, it can 
cause lack of spanning tree connectivity. It can be set by a network administrator 
to prevent bridges external to a core region of the network influencing the 
spanning tree active topology, possibly because those bridges are not under the 
full control of the administrator. This feature is also known as 

Root Guard

. 

 

Restricted TCN 

If enabled, causes the port not to propagate received topology change 
notifications and topology changes to other ports. If set it can cause temporary 
loss of connectivity after changes in a spanning trees active topology as a result of 
persistent incorrectly learned station location information. It is set by a network 
administrator to prevent bridges external to a core region of the network, causing 
address flushing in that region, possibly because those bridges are not under the 
full control of the administrator or is the physical link state for the attached LANs 
transitions frequently. 

 

BPDU Guard

 

If enabled, causes the port to disable itself upon receiving valid BPDU's. Contrary 
to the similar bridge setting, the port 

Edge

 status doesn’t affect this setting.  

A port entering error-disabled state due to this setting is subject to the bridge Port 
Error Recovery setting as well.  

 

Point2Point 

Controls whether the port connects to a point-to-point LAN rather than a shared 
medium. This can be automatically determined, or forced either true or false. 
Transition to the forward state is faster for point-to-point LANs than for shared 
media.  
(This applies to physical ports only. Aggregations are always 

forced Point2Point

). 

 

Buttons 

: Click to save changes. 

: Click to undo any changes made locally and revert to previously saved values.

 

 

By default, the system automatically detects the speed and duplex mode used on each port, and configures the path cost 

according to the values shown below. Path cost “0” is used to indicate auto-configuration mode. When the short path cost method 

is selected and the default path cost recommended by the IEEE 8021w standard exceeds 65,535, the default is set to 65,535.  

Port Type  

IEEE 802.1D-1998  

IEEE 802.1w-2001  

Ethernet  

50-600  

200,000-20,000,000  

Fast Ethernet  

10-60  

20,000-2,000,000  

Gigabit Ethernet  

3-10  

2,000-200,000  

Table 4-7-1

 Recommended STP Path Cost Range 

 

Port Type  

Link Type  

IEEE 802.1D-1998  

IEEE 802.1w-2001  

Summary of Contents for IFS NS3550-24T/4S



















































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for IFS NS3550-24T/4S

CALIENT S320 Hardware User'S Manual preview
S320
Brand: CALIENT Pages: 46
CALIENT S320 Getting Started Manual preview
S320
Brand: CALIENT Pages: 42
vantiva COM3000 Installation Manual preview
COM3000
Brand: vantiva Pages: 58
SMC Networks PF2MC7 Series Operation Manual preview
PF2MC7 Series
Brand: SMC Networks Pages: 102
Network Technologies VEEMUX SM-nXm-15V-LC Installation And Operation Manual preview
VEEMUX SM-nXm-15V-LC
Brand: Network Technologies Pages: 46
Fairchild FSDH321 Manual preview
FSDH321
Brand: Fairchild Pages: 20
Farallon Fast Starlet User Manual preview
Fast Starlet
Brand: Farallon Pages: 22
StarTech.com VS221HD20 Quick Start Manual preview
VS221HD20
Brand: StarTech.com Pages: 2
Dataprobe iBootBar iBB-DC8 Installation And Operations preview
iBootBar iBB-DC8
Brand: Dataprobe Pages: 36
PTN MUH66TP-N User Manual preview
MUH66TP-N
Brand: PTN Pages: 44
Edimax ER-5397P User Manual preview
ER-5397P
Brand: Edimax Pages: 8
TRENDnet TK-423K - USB/PS/2 KVM Switch Quick Installation Manual preview
TK-423K - USB/PS/2 KVM Switch
Brand: TRENDnet Pages: 14
Festo SMT-8-...-B Series Manual preview
SMT-8-...-B Series
Brand: Festo Pages: 2
Net Optics iBYPASS 40G Quick Install Manual preview
iBYPASS 40G
Brand: Net Optics Pages: 20
Blueridge Digi-Touch DDN-SW1 Installation Manual preview
Digi-Touch DDN-SW1
Brand: Blueridge Pages: 13
I/O Interconnect SV141D0 User Manual preview
SV141D0
Brand: I/O Interconnect Pages: 27
ADTRAN Small Form-Factor Pluggable Gigabit Ethernet Specification Manual preview
Small Form-Factor Pluggable Gigabit Ethernet
Brand: ADTRAN Pages: 2
Kramer VS-2516 User Manual preview
VS-2516
Brand: Kramer Pages: 22

Brands by name

Popular brands

Load more brands