Interlogix IFS NS3550-24T/4S User Manual Download

Page: 198 / 498

198

4.11 Authentication

This section is to control the access of the Managed Switch and includes the user access and management control.

The Authentication section contains links to the following main topics:



IEEE 802.1X Port-Based Network Access Control



MAC-Based Authentication



User Authentication

Overview of 802.1X (Port-Based) Authentication

In the 802.1X-world, the user is called the supplicant, the switch is the authenticator, and the RADIUS server is the authentication

server. The switch acts as the man-in-the-middle, forwarding requests and responses between the supplicant and the

authentication server. Frames sent between the supplicant and the switch is special 802.1X frames, known as

EAPOL (EAP

Over LANs)

frames. EAPOL frames encapsulate

EAP PDU

s (RFC3748). Frames sent between the switch and the RADIUS

server is RADIUS packet. RADIUS packets also encapsulate EAP PDUs together with other attributes like the switch's IP

address, name, and the supplicant's port number on the switch. EAP is very flexible, in that it allows for different authentication

methods, like

MD5-Challenge

PEAP

, and

TLS

. The important thing is that the authenticator (the switch) doesn't need to know

which authentication method the supplicant and the authentication server are using, or how many information exchange frames

are needed for a particular method. The switch simply encapsulates the EAP part of the frame into the relevant type (EAPOL or

RADIUS) and forwards it.

When authentication is complete, the RADIUS server sends a special packet containing a success or failure indication. Besides

forwarding this decision to the supplicant, the switch uses it to open up or block traffic on the switch port connected to the

supplicant.

Overview of MAC-Based Authentication

Unlike 802.1X, MAC-based authentication is not a standard, but merely a best-practices method adopted by the industry. In

MAC-based authentication, users are called clients, and the switch acts as the supplicant on behalf of clients. The initial frame

(any kind of frame) sent by a client is snooped by the switch, which in turn uses the client's MAC address as both username and

password in the subsequent EAP exchange with the RADIUS server. The 6-byte MAC address is converted to a string on the

following form "xx-xx-xx-xx-xx-xx", that is, a dash (-) is used as separator between the lower-cased hexadecimal digits. The

switch only supports the MD5-Challenge authentication method, so the RADIUS server must be configured accordingly.

When authentication is complete, the RADIUS server sends a success or failure indication, which in turn causes the switch to

open up or block traffic for that particular client, using static entries into the MAC Table. Only then will frames from the client be

forwarded on the switch. There are no EAPOL frames involved in this authentication, and therefore, MAC-based Authentication

has nothing to do with the 802.1X standard.

The advantage of MAC-based authentication over 802.1X is that several clients can be connected to the same port (e.g. through

a 3rd party switch or a hub) and still require individual authentication, and that the clients don't need special supplicant software

Summary of Contents for IFS NS3550-24T/4S



















































































































































































































































































































































































































































































































Search results

Summary of Contents for IFS NS3550-24T/4S

Reviews:

Related manuals for IFS NS3550-24T/4S

Brands by name

Popular brands

Interlogix IFS NS3550-24T/4S, User Manual

Search results

Summary of Contents for IFS NS3550-24T/4S

Reviews:

Related manuals for IFS NS3550-24T/4S

Brands by name

Popular brands