manualshive.com logo in svg

Interlogix IFS NS3550-24T/4S, User Manual

The Interlogix IFS NS3550-24T/4S is a cutting-edge network switch - a reliable and high-performance solution for seamless data transmission. For a comprehensive understanding of its features and settings, users can conveniently access the detailed User Manual. It is available for free download at 88.208.23.73:8080, offering valuable resources at your fingertips.

Share
Download
background image

User’s Manual of NS3550-24T/4S 

 

 

205 

 

 

 

The page includes the following fields: 

System Configuration 

Object 

Description 

 

Mode 

Indicates if NAS is globally enabled or disabled on the switch. If globally disabled, 
all ports are allowed forwarding of frames. 

 

Reauthentication 
Enabled 

If checked, successfully authenticated supplicants/clients are reauthenticated 
after the interval specified by the Reauthentication Period. Reauthentication for 
802.1X-enabled ports can be used to detect if a new device is plugged into a 
switch port or if a supplicant is no longer attached.  

For MAC-based ports, reauthentication is only useful if the RADIUS server 
configuration has changed. It does not involve communication between the switch 
and the client, and therefore doesn't imply that a client is still present on a port. 

 

Reauthentication 
Period 

Determines the period, in seconds, after which a connected client must be 
reauthenticated. This is only active if the Reauthentication Enabled checkbox is 
checked. Valid values are in the range 1 to 3600 seconds. 

 

EAPOL Timeout 

Determines the time between retransmission of Request Identity EAPOL frames.
Valid values are in the range 1 to 255 seconds. This has no effect for MAC-based 
ports. 

 

Age Period 

This setting applies to the following modes, i.e. modes using the Port Security 
functionality to secure MAC addresses: 

Single 802.1X 
Multi 802.1X 
MAC-Based Auth

. 

When the NAS module uses the Port Security module to secure MAC addresses, 
the Port Security module needs to check for activity on the MAC address in 
question at regular intervals and free resources if no activity is seen within a given 
period of time. This parameter controls exactly this period and can be set to a 
number between 10 and 1000000 seconds.  
If reauthentication is enabled and the port is in 802.1X-based mode, this is not so 
criticial, since supplicants that are no longer attached to the port will get removed 
upon the next reauthentication, which will fail. But if reauthentication is not 
enabled, the only way to free resources is by aging the entries.  
For ports in MAC-based Auth. mode, reauthentication doesn't cause direct 
communication between the switch and the client, so this will not detect whether 
the client is still attached or not, and the only way to free any resources is to age 
the entry. 

 

Hold Time 

This setting applies to the following modes, i.e. modes using the Port Security 
functionality to secure MAC addresses: 

Single 802.1X 
Multi 802.1X 
MAC-Based Auth

. 

If a client is denied access - either because the RADIUS server denies the client 
access or because the RADIUS server request times out (according to the 
timeout specified on the "Configuration

→

Security

→

AAA" page) - the client is put 

on hold in the Unauthorized state. The hold timer does not count during an 
on-going authentication. 
In MAC-based Auth. mode, the The switch will ignore new frames coming from 
the client during the hold time. 
The Hold Time can be set to a number between 10 and 1000000 seconds. 

 

RADIUS-Assigned QoS 
Enabled 

RADIUS-assigned QoS provides a means to centrally control the traffic class to 
which traffic coming from a successfully authenticated supplicant is assigned on 
the switch. The RADIUS server must be configured to transmit special RADIUS 
attributes to take advantage of this feature (see RADIUS-Assigned QoS Enabled 
below for a detailed description). 

Summary of Contents for IFS NS3550-24T/4S



















































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for IFS NS3550-24T/4S

Panasonic KX-T206E Product Description preview
KX-T206E
Brand: Panasonic Pages: 20
Panasonic PN28240i-ID Operation Manual preview
PN28240i-ID
Brand: Panasonic Pages: 281
Balluff BNI IOL-727-S51-P012 Assembly Instructions Manual preview
BNI IOL-727-S51-P012
Brand: Balluff Pages: 20
Cabletron Systems SmartSwitch 9A100 Installation And Setup Manual preview
SmartSwitch 9A100
Brand: Cabletron Systems Pages: 52
Cabletron Systems SmartSwitch 9W006 Quick Start Manual preview
SmartSwitch 9W006
Brand: Cabletron Systems Pages: 34
Cabletron Systems SmartSTACK ELS100-S24TX2M Management Manual preview
SmartSTACK ELS100-S24TX2M
Brand: Cabletron Systems Pages: 102
Cabletron Systems 9A426-01 Appendix preview
9A426-01
Brand: Cabletron Systems Pages: 24
Cabletron Systems SmartSwitch 9000 Appendix preview
SmartSwitch 9000
Brand: Cabletron Systems Pages: 14
Cabletron Systems MicroMMAC 22ES Reference Manual preview
MicroMMAC 22ES
Brand: Cabletron Systems Pages: 38
LEGRAND WZ3RL10 Installation Instructions preview
WZ3RL10
Brand: LEGRAND Pages: 2
Maipu MyPower S2300-28TC-AC Installation Manual preview
MyPower S2300-28TC-AC
Brand: Maipu Pages: 31
CyberData 4-Port PoweredUSB 2.0 Hub 011006 Quick Reference Manual preview
4-Port PoweredUSB 2.0 Hub 011006
Brand: CyberData Pages: 4
Gembird UHB-U3P7P-01 User Manual preview
UHB-U3P7P-01
Brand: Gembird Pages: 2
Abseco AFI-2M0S1B Installation Manual preview
AFI-2M0S1B
Brand: Abseco Pages: 10
Datavideo KMU-200 Instruction Manual preview
KMU-200
Brand: Datavideo Pages: 64
KanexPro HDMX44A-18G Operation Manual preview
HDMX44A-18G
Brand: KanexPro Pages: 35
C&C TECHNIC VAX-8204F User Manual preview
VAX-8204F
Brand: C&C TECHNIC Pages: 2
KinAn DV2302 User Manual preview
DV2302
Brand: KinAn Pages: 5

Brands by name

Popular brands

Load more brands