manualshive.com logo in svg

Interlogix IFS NS3550-24T/4S, User Manual

The Interlogix IFS NS3550-24T/4S is a cutting-edge network switch - a reliable and high-performance solution for seamless data transmission. For a comprehensive understanding of its features and settings, users can conveniently access the detailed User Manual. It is available for free download at 88.208.23.73:8080, offering valuable resources at your fingertips.

Share
Download
background image

User’s Manual of NS3550-24T/4S 

 

 

207 

 

In this mode, the switch will send one EAPOL Failure frame when the port link 
comes up, and any client on the port will be disallowed network access.  

Port-based 802.1X 

In the 802.1X-world, the user is called the supplicant, the switch is the 
authenticator, and the RADIUS server is the authentication server. The 
authenticator acts as the man-in-the-middle, forwarding requests and responses 
between the supplicant and the authentication server. Frame sent between the 
supplicant and the switch is special 802.1X frame, known as EAPOL (EAP Over 
LANs) frames. EAPOL frames encapsulate EAP PDUs (RFC3748). Frame sent 
between the switch and the RADIUS server is RADIUS packet. RADIUS packets 
also encapsulate EAP PDUs together with other attributes like the switch's IP 
address, name, and the supplicant's port number on the switch. EAP is very 
flexible, in that it allows for different authentication methods, like MD5-Challenge, 
PEAP, and TLS. The important thing is that the authenticator (the switch) doesn't 
need to know which authentication method the supplicant and the authentication 
server are using, or how many information exchange frames are needed for a 
particular method. The switch simply encapsulates the EAP part of the frame into 
the relevant type (EAPOL or RADIUS) and forwards it. 
When authentication is complete, the RADIUS server sends a special packet 
containing a success or failure indication. Besides forwarding this decision to the 
supplicant, the switch uses it to open up or block traffic on the switch port 
connected to the supplicant. 

Note

: Suppose two backend servers are enabled and that the server timeout is 

configured to X seconds (using the AAA configuration page), and suppose that 
the first server in the list is currently down (but not considered dead). Now, if the 
supplicant retransmits EAPOL Start frames at a rate faster than X seconds, then it 
will never get authenticated, because the switch will cancel on-going backend 
authentication server requests whenever it receives a new EAPOL Start frame 
from the supplicant. And since the server hasn't yet failed (because the X seconds 
haven't expired), the same server will be contacted upon the next backend 
authentication server request from the switch. This scenario will loop forever. 
Therefore, the server timeout should be smaller than the supplicant's EAPOL Start 
frame retransmission rate.  

Single 802.1X 

In port-based 802.1X authentication, once a supplicant is successfully 
authenticated on a port, the whole port is opened for network traffic. This allows 
other clients connected to the port (for instance through a hub) to piggy-back on 
the successfully authenticated client and get network access even though they 
really aren't authenticated. To overcome this security breach, use the Single 
802.1X variant. 
Single 802.1X is really not an IEEE standard, but features many of the same 
characteristics, as does port-based 802.1X. In Single 802.1X, at most one 
supplicant can get authenticated on the port at a time. Normal EAPOL frames are 
used in the communication between the supplicant and the switch. If more than 
one supplicant is connected to a port, the one that comes first when the port's link 
comes up will be the first one considered. If that supplicant doesn't provide valid 
credentials within a certain amount of time, another supplicant will get a chance. 
Once a supplicant is successfully authenticated, only that supplicant will be 
allowed access. This is the most secure of all the supported modes. In this mode, 
the Port Security module is used to secure a supplicant's MAC address once 
successfully authenticated.  

Multi 802.1X 

In port-based 802.1X authentication, once a supplicant is successfully 
authenticated on a port, the whole port is opened for network traffic. This allows 
other clients connected to the port (for instance through a hub) to piggy-back on 
the successfully authenticated client and get network access even though they 
really aren't authenticated. To overcome this security breach, use the Multi 802.1X 
variant. 
Multi 802.1X is really not an IEEE standard, but features many of the same 
characteristics as does port-based 802.1X. Multi 802.1X is - like Single 802.1X - 
not an IEEE standard, but a variant that features many of the same 
characteristics. In Multi 802.1X, one or more supplicants can get authenticated on 
the same port at the same time. Each supplicant is authenticated individually and 
secured in the MAC table using the Port Security module. 

Summary of Contents for IFS NS3550-24T/4S



















































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for IFS NS3550-24T/4S

G&D DVIMUX4-DL-USB Installation And Operations preview
DVIMUX4-DL-USB
Brand: G&D Pages: 36
Lantronix SM8TAT2SA Quick Start Manual preview
SM8TAT2SA
Brand: Lantronix Pages: 2
FS IES3110-8TF Quick Start Manual preview
IES3110-8TF
Brand: FS Pages: 33
Lantech IGS-2206C User Manual preview
IGS-2206C
Brand: Lantech Pages: 118
G&D TradeSwitch2-USB Assembly, Installation And Operation Manual preview
TradeSwitch2-USB
Brand: G&D Pages: 88
Gembird UHB-U3P7P-01 User Manual preview
UHB-U3P7P-01
Brand: Gembird Pages: 2
Key Digital KD-PS42 Manual preview
KD-PS42
Brand: Key Digital Pages: 31
Manhattan 177290 User Manual preview
177290
Brand: Manhattan Pages: 4
SLV 470819 Quick Installation Manual preview
470819
Brand: SLV Pages: 22
Accton Technology CheetaHub Classic-2041 Quick Installation Manual preview
CheetaHub Classic-2041
Brand: Accton Technology Pages: 7
SOMFY COMMANDE MURALE RTS Manual preview
COMMANDE MURALE RTS
Brand: SOMFY Pages: 2
Link MX44-4KUHDE Manual preview
MX44-4KUHDE
Brand: Link Pages: 35
MCOHome MH-S312 User Manual preview
MH-S312
Brand: MCOHome Pages: 3
PS Engineering PMA8000 Installation And Operaion Manual preview
PMA8000
Brand: PS Engineering Pages: 32
Eaton T03 I2-NA Series Instruction Leaflet preview
T03 I2-NA Series
Brand: Eaton Pages: 6
Secutron MRI-101P Installation Instructions preview
MRI-101P
Brand: Secutron Pages: 2
B+B SmartWorx 232BSS4 Quick Start Manual preview
232BSS4
Brand: B+B SmartWorx Pages: 2
Wise P941 Instruction Manual preview
P941
Brand: Wise Pages: 8

Brands by name

Popular brands

Load more brands