manualshive.com logo in svg

Interlogix IFS NS3550-24T/4S, User Manual

The Interlogix IFS NS3550-24T/4S is a cutting-edge network switch - a reliable and high-performance solution for seamless data transmission. For a comprehensive understanding of its features and settings, users can conveniently access the detailed User Manual. It is available for free download at 88.208.23.73:8080, offering valuable resources at your fingertips.

Share
Download
background image

 

 
 

268

Device (Class III) will also support all aspects of TIA-1057 applicable to both 
Media Endpoints (Class II) and Generic Endpoints (Class I). 

LLDP-MED Generic Endpoint (Class I)  

The LLDP-MED Generic Endpoint (Class I) definition is applicable to all endpoint 
products that require the base LLDP discovery services defined in TIA-1057, 
however do not support IP media or act as an end-user communication appliance. 
Such devices may include (but are not limited to) IP Communication Controllers, 
other communication related servers, or any device requiring basic services as 
defined in TIA-1057. 
Discovery services defined in this class include LAN configuration, device 
location, network policy, power management, and inventory management. 

LLDP-MED Media Endpoint (Class II)  

The LLDP-MED Media Endpoint (Class II) definition is applicable to all endpoint 
products that have IP media capabilities however may or may not be associated 
with a particular end user. Capabilities include all of the capabilities defined for the 
previous Generic Endpoint Class (Class I), and are extended to include aspects 
related to media streaming. Example product categories expected to adhere to 
this class include (but are not limited to) Voice / Media Gateways, Conference 
Bridges, Media Servers, and similar. 
Discovery services defined in this class include media-type-specific network layer 
policy discovery. 

LLDP-MED Communication Endpoint (Class III)  

The LLDP-MED Communication Endpoint (Class III) definition is applicable to all 
endpoint products that act as end user communication appliances supporting IP 
media. Capabilities include all of the capabilities defined for the previous Generic 
Endpoint (Class I) and Media Endpoint (Class II) classes, and are extended to 
include aspects related to end user devices. Example product categories 
expected to adhere to this class include (but are not limited to) end user 
communication appliances, such as IP Phones, PC-based softphones, or other 
communication appliances that directly support the end user. 
Discovery services defined in this class include provision of location identifier 
(including ECS / E911 information), embedded L2 switch support, inventory 
management 

 

LLDP-MED Capabilities 

LLDP-MED Capabilities describes the neighbor unit's LLDP-MED capabilities. 
The possible capabilities are: 

1. LLDP-MED capabilities 
2. Network Policy 
3. Location Identification 
4. Extended Power via MDI - PSE 
5. Extended Power via MDI - PD 
6. Inventory 
7. Reserved 

 

Application Type 

Application Type indicating the primary function of the application(s) defined for 
this network policy, advertised by an Endpoint or Network Connectivity Device. 
The poosible application types are shown below. 

Voice

 - for use by dedicated IP Telephony handsets and other similar appliances 

supporting interactive voice services. These devices are typically deployed on a 
separate VLAN for ease of deployment and enhanced security by isolation from 
data applications. 

Voice Signaling

 - for use in network topologies that require a different policy for 

the voice signaling than for the voice media. 

Guest Voice

 - to support a separate limited feature-set voice service for guest 

users and visitors with their own IP Telephony handsets and other similar 
appliances supporting interactive voice services. 
Guest Voice Signaling - for use in network topologies that require a different policy 
for the guest voice signaling than for the guest voice media. 

Softphone Voice

 - for use by softphone applications on typical data centric 

devices, such as PCs or laptops. 

Video Conferencing

 - for use by dedicated Video Conferencing equipment and 

other similar appliances supporting real-time interactive video/audio services. 

Streaming Video

 - for use by broadcast or multicast based video content 

distribution and other similar applications supporting streaming video services 
that require specific network policy treatment. Video applications relying on TCP 
with buffering would not be an intended use of this application type. 

Video Signaling

 - for use in network topologies that require a separate policy for 

the video signaling than for the video media. 

 

Policy 

Policy 

Unknown

: The network policy for the specified application type is currently 

unknown. 

Summary of Contents for IFS NS3550-24T/4S



















































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for IFS NS3550-24T/4S

eao 04 Series Assembly Instructions preview
04 Series
Brand: eao Pages: 2
eao 04 Series Assembly Instruction preview
04 Series
Brand: eao Pages: 2
Cabletron Systems MMAC-Plus 9H423-26 Supplementary Manual preview
MMAC-Plus 9H423-26
Brand: Cabletron Systems Pages: 14
3Com Gigabit Switch 8 Specifications preview
Gigabit Switch 8
Brand: 3Com Pages: 2
Abseco AFI-2M0S1B Installation Manual preview
AFI-2M0S1B
Brand: Abseco Pages: 10
ADDER ADDERView Secure AVS-4128 User Manual preview
ADDERView Secure AVS-4128
Brand: ADDER Pages: 24
DeLOCK 11481 User Manual preview
11481
Brand: DeLOCK Pages: 26
Extreme Networks Summit X450-G2-24t-GE4 Installation Manual preview
Summit X450-G2-24t-GE4
Brand: Extreme Networks Pages: 2
Vanco Evolution EVMX4442 Manual preview
Evolution EVMX4442
Brand: Vanco Pages: 12
W2IIHY 3 4 Operating Manual preview
3 4
Brand: W2IIHY Pages: 28
Accton Technology CheetaHub Power-3004E Quick Installation Manual preview
CheetaHub Power-3004E
Brand: Accton Technology Pages: 11
Murphy EVS-2 Installation And Operation Manual preview
EVS-2
Brand: Murphy Pages: 24
Harman AMX Enova AVX-400 Quick Start Manual preview
AMX Enova AVX-400
Brand: Harman Pages: 2
NEOiD STUDIO 4 Operator'S Manual preview
STUDIO 4
Brand: NEOiD Pages: 44
Manhattan 151245 Instructions preview
151245
Brand: Manhattan Pages: 2
Eaton Tripp-Lite B005-HUA2-K Quick Start Manual preview
Tripp-Lite B005-HUA2-K
Brand: Eaton Pages: 4
Eaton xComfort CTAA-01/01 Assembly Instructions preview
xComfort CTAA-01/01
Brand: Eaton Pages: 4
Eaton TRIPP LITE U460-004-4A-C Owner'S Manual preview
TRIPP LITE U460-004-4A-C
Brand: Eaton Pages: 20

Brands by name

Popular brands

Load more brands