Interlogix NS3500-24T-4C Command Manual Download

Page: 6 / 326

Chapter 1: Command line interface

Requirements

• Workstations running Windows XP/Vista/7/8/10, Windows 2003/2008, MAC OS X or

later, Linux, UNIX, or other platforms are compatible with TCP/IP protocols.

• Workstations are installed with Ethernet NIC (Network Interface Card).

• Serial Port Connection (Terminal)

• The above Workstations come with COM Port (DB9) or USB-to-RS-232

converter.

• The above Workstations have been installed with terminal emulator, such as

Hyper Terminal included in Windows XP/2003.

• Serial cable -- one end is attached to the RS-232 serial port, while the other end

to the console port of the Managed Switch.

• Ethernet Port Connection

• Network cables -- Use standard network (UTP) cables with RJ-45 connectors.

• The above PC is installed with Web Browser and JAVA runtime environment

plug-in.

NS3500-24T-4C Managed Switch Command Guide

Summary of Contents for NS3500-24T-4C







































































































































































































































































































































Search results

Summary of Contents for NS3500-24T-4C

Reviews:

Related manuals for NS3500-24T-4C

Brands by name

Popular brands

Interlogix NS3500-24T-4C, Command Manual

Search results

Summary of Contents for NS3500-24T-4C

Reviews:

Related manuals for NS3500-24T-4C

Brands by name

Popular brands