manualshive.com logo in svg

Interlogix NS4750-24S-4T-4X, User Manual

The Interlogix NS4750-24S-4T-4X is a cutting-edge network switch designed for seamless data transmission. For a hassle-free setup, refer to the free Quick Start Manual available for download on our website. Maximize the potential of your new device by accessing the comprehensive manual anytime at 88.208.23.73:8080.

Share
Download
background image

 

 

 

11

1.2 Product Descriptions

 

   

Multiple SFP Fiber Port Switch for Increasing Long-reach Networking of Enterprise, Telecoms and Campus 

The NS4750 is equipped with advanced management functions and provides 

24 100/1000Mbps dual speed 

SFP fiber ports, 

4 

10Gbps

 dual speed fiber ports and 

4 10/100/1000Mbps TP/SFP 

ports delivered in a rugged strong case. It is capable of providing 

non-blocking switch fabric and wire-speed throughput as high as 

128Gbps 

in the temperature range from 

-10 to 60 degrees C

 

without any packet loss and CRC error, which greatly simplify the tasks of upgrading the enterprise LAN for catering to increasing 
bandwidth demands. The NS4750 is specially designed for service provider to deliver profitable Ethernet network. The NS4750 
adopts “

Front Access

” design, making the wiring and maintenance of the NS4750 placed in a cabinet very easy for technicians. 

 

 

Support for 10Gb Ethernet 

10Gb Ethernet which adopts full-duplex technology instead of low-speed, half-duplex CSMA/CD protocol, is a big leap in the 
evolution of Ethernet. 10Gb Ethernet can be deployed in star or ring topologies. With 10Gb Ethernet, the NS4750 switch provides 
broad bandwidth and powerful processing capacity. It is suitable for metropolitan networks and wide area networks. Using the 
NS4750 switch, users can simplify network structures and reduce cost of network construction. 

 

Optimized Design for MAN Redundant Ring, Fast Recovery for Surveillance or Industrial System 

The NS4750 supports redundant ring technology and features strong rapid self-recovery capability to prevent interruptions and 
external intrusions. It incorporates ITU G.8032 Ethernet Ring Protection Switching technology, Spanning Tree Protocol (802.1w 
RSTP), and redundant power supply system into customer’s industrial automation network to enhance system reliability and 
uptime in harsh factory environments. The NS4750 also protects customer’s industrial network connectivity with switching 
recovery capability that is used for implementing fault tolerant ring and mesh network architectures. If the Industrial network is 
interrupted accidentally, the fault recovery times could be less than 50ms to quickly bring the network back to normal operation. 
 

 
Cost-effective IPv6 Managed Gigabit Switch Solution for Metro   

Nowadays, lots of electronic products or mobile devices can browse the Internet, which means the need of IP address increases. 
However, the current IPv4 network infrastructure is not capable enough to provide IP address to each single user/client. The 
situation forces the ISP to come out with the IPv6 (Internet Protocol version 6) network infrastructure. To fulfill the demand, IFS 
releases the IPv6 management Gigabit Ethernet Switch. It supports both IPv4 and IPv6 management functions. It can work with 
the original network structure (IPv4) and also support the new network structure (IPv6). With easy and friendly management 
interfaces and plenty of management functions included, the NS4750 Managed Switch is the best choice for you to build the IPv6 
FTTx edge service and for Industries to connect with IPv6 network. 

 

Summary of Contents for NS4750-24S-4T-4X














































































































































































































































































































































































































































Reviews:

No comments

Related manuals for NS4750-24S-4T-4X

GAIM Compact Troubleshooting preview
Compact
Brand: GAIM Pages: 2
H3C S5800-EI Series Installation Manual preview
S5800-EI Series
Brand: H3C Pages: 61
VADA FLOW BOSS VFB-DSU Installation Manual preview
FLOW BOSS VFB-DSU
Brand: VADA Pages: 17
Data EOC Master CD7944N Product User Manual preview
EOC Master CD7944N
Brand: Data Pages: 18
UniFi USW-Flex-Mini Quick Start Manual preview
USW-Flex-Mini
Brand: UniFi Pages: 8
Extron electronics 4xi series User Manual preview
4xi series
Brand: Extron electronics Pages: 3
RONK VIGILANT VTS0400 Owners & Installation Manual preview
VIGILANT VTS0400
Brand: RONK Pages: 32
Uniclass AI-CP02A Quick Installation Manual preview
AI-CP02A
Brand: Uniclass Pages: 2
ATEN Altusen KN9008 User Manual preview
Altusen KN9008
Brand: ATEN Pages: 178
EtherWAN EX78900X Series Installation Manual preview
EX78900X Series
Brand: EtherWAN Pages: 2
A-Neuvideo ANI-5MFS Instruction Manual preview
ANI-5MFS
Brand: A-Neuvideo Pages: 20
EnGenius ESW-8228 User Manual preview
ESW-8228
Brand: EnGenius Pages: 72
DataParts DAP-SW1004 User Manual preview
DAP-SW1004
Brand: DataParts Pages: 4
Pliant CrewCom CHB-8C Operating Manual preview
CrewCom CHB-8C
Brand: Pliant Pages: 49
Shinybow USA SB-5688CAP Instruction Manual preview
SB-5688CAP
Brand: Shinybow USA Pages: 32
U-Fairy G.R. IOT Tech GR-201N User Manual preview
GR-201N
Brand: U-Fairy G.R. IOT Tech Pages: 3
Lindy 38273 User Manual preview
38273
Brand: Lindy Pages: 12
JABSCO 18680-0000 Manual preview
18680-0000
Brand: JABSCO Pages: 2

Brands by name

Popular brands

Load more brands