Interlogix NS4750-24S-4T-4X User Manual Download

Page: 216 / 429

216

: Updates the table starting from the first entry in the MVR SFM Information Table.

4.9 Quality of Service

4.9.1 Understand QOS

Quality of Service (QoS) is an advanced traffic prioritization feature that allows you to establish control over network traffic. QoS

enables you to assign various grades of network service to different types of traffic, such as multi-media, video, protocol-specific,

time critical, and file-backup traffic.

QoS reduces bandwidth limitations, delay, loss, and jitter. It also provides increased reliability for delivery of your data and allows

you to prioritize certain applications across your network. You can define exactly how you want the switch to treat selected

applications and types of traffic. You can use QoS on your system to:



Control a wide variety of network traffic by:



Classifying traffic based on packet attributes.



Assigning priorities to traffic (for example, to set higher priorities to time-critical or business-critical applications).



Applying security policy through traffic filtering.



Provide predictable throughput for multimedia applications such as video conferencing or voice over IP by minimizing

delay and jitter.



Improve performance for specific types of traffic and preserve performance as the amount of traffic grows.



Reduce the need to constantly add bandwidth to the network.



Manage network congestion.

QoS Terminology



Classifier

－

classifies the traffic on the network. Traffic classifications are determined by protocol, application, source,

destination, and so on. You can create and modify classifications. The Switch then groups classified traffic in order to

schedule them with the appropriate service level.



DiffServ Code Point (DSCP)

－

is the traffic prioritization bits within an IP header that are encoded by certain

applications and/or devices to indicate the level of service required by the packet across a network.



Service Level

－

defines the priority that will be given to a set of classified traffic. You can create and modify service levels.



Policy

－

comprises a set of “rules” that are applied to a network so that a network meets the needs of the business. That

is, traffic can be prioritized across a network according to its importance to that particular business type.



QoS Profile

－

consists of multiple sets of rules (classifier plus service level combinations). The QoS profile is assigned to

a port(s).



Rules

－

comprises a service level and a classifier to define how the Switch will treat certain types of traffic. Rules are

associated with a QoS Profile (see above).

To implement QoS on your network, you need to carry out the following actions:

Define a service level to determine the priority that will be applied to traffic.

Apply a classifier to determine how the incoming traffic will be classified and thus treated by the Switch.

Create a QoS profile which associates a service level and a classifier.

Summary of Contents for NS4750-24S-4T-4X














































































































































































































































































































































































































































Search results

Summary of Contents for NS4750-24S-4T-4X

Reviews:

Related manuals for NS4750-24S-4T-4X

Brands by name

Popular brands

Interlogix NS4750-24S-4T-4X, User Manual

Search results

Summary of Contents for NS4750-24S-4T-4X

Reviews:

Related manuals for NS4750-24S-4T-4X

Brands by name

Popular brands