NX-181xx NetworX Voice keypad with touch buttons User Manual
19
4.
Activate all detection devices, by walking within the field of view of
motion sensors and opening and closing all protected windows and
doors.
5.
Touch status to review tested zones
6.
[MENU]
Moves back to component test selection. (step 3)
7.
[MENU]
Exits back to main menu (“Touch [1] to control zone
bypass…etc……etc……")
8.
[MENU]
Touch menu to exit
User Configuration
– Menu 5
The user configuration menu is where user pin codes are assigned to users, a
user code is used to arm and disarm partitions within your security system. They
are generally four digits in length, but can be configured by your service provider
to be six digits in length if this level of security is required. The user configuration
menu is where you also assign partition control and adjust authorization levels to
each user. Assigning partitions to users, determines which sections (partitions) of
the security system a user may access. The authorization level determines the
options available to that user, user authorization is where you would alter and
increase a users authority to become a Master Code. Master codes can only
create, delete or modify user codes with equal or less authority than themselves.
How to: Configure (set up) a new pin code for a specific user
Step Example:
Configure pin code 2580 for user 4.
1.
[MENU] - [5]
Selects main menu - Option 5, User configuration.
2.
[?]-[?]-[?]-[?]
Enter your 4 or 6 digit Master pin code.
3.
[1]
Selects configure user pin.
4.
[4]
– [ENTER]
Selects user 4.
5.
[2]-[5]-[8]-[0]
[ENTER]
Sets user 4 pin code as 2580.
6.
[MENU]
Moves back to user configuration (step 3).
7.
[MENU]
Exits back to main menu (“Touch [1] to control zone
bypass…etc……etc……")
8.
[MENU]
Touch menu to exit.
How to: Delete a pin code from a specific user
Step Example:
Delete the pin code that is configured for user 4.
1.
[MENU] - [5]
Selects main menu - Option 5, User configuration.
2.
[?]-[?]-[?]-[?]
Enter your 4 or 6 digit Master pin code.
