15. Click
Save
to save changes.
Tamper-proof alarms
The camera can be configured to trigger an alarm when the lens is covered and take an
alarm response action.
To set up tamper-proof alarms:
1. From the menu toolbar, click
Configuration
>
Event
>
Basic
Event
>
Tamper-
proof
.
2. Select the
Enable
check
box.
3. Move the
Sensitivity
slider to set the sensitivity of the detection.
4. Click
Save
to save changes.
5. Click the
Arming Schedule
tab to edit the arming schedule. Click and drag along
the time bars or click on a time bar to configure arming schedule times.
Note:
All scheduled times are based on the 24-hour clock. Ensure that the correct
time zone and daylight saving time settings have been configured in
Configuration
>
System
>
System Settings
.
6. Click
to copy the schedule to other days by selecting the corresponding check
box next to the day.
7. Click
Save
to save changes.
8. Click the
Linkage Method
tab to specify the linkage method for when an event
occurs. Select one or more response methods for the system when an alarm is
triggered. See “Linkage methods” on page 31 for details.
9. Click
Save
to save changes.
TruVision 81 Series IP Camera Configuration Manual
35
