TruVision 360° Camera Configuration Manual
25
3.
Recording schedule
: Define the schedule during which motion detection can be
recorded. See “Defining a recording schedule” on page 30 for further information.
4.
Linkage
: Specify the method of response to the alarm.
To set up motion detection:
1. Click
Configuration
>
Events
>
Motion Detection
.
2. Check the
Enable Motion Detection
box.
Check
Enable Dynamic Analysis for motion
if you want to see motion real-time.
Note:
Deselect the “Enable Motion Detection” option to disable the motion detection
alarm.
3. Click
Draw Area
. Click and drag the mouse on the live video image to draw an area
sensitive to motion detection.
Note:
You can draw up to 8 motion detection areas on the same image.
4. Click
Stop Drawing
to finish drawing. Click
Clear All
to delete all areas marked and
restart drawing.
5. Move the
Sensitivity
slider to set the sensitivity of the detection. All areas will have
the same sensitivity level.
6. Click
Edit
to edit the arming schedule. See the picture below for the editing interface
of the arming schedule.
7. Choose the day and click
to set the detailed time period. You can copy the
schedule to other days.
8. Click
OK
to save changes.
9. Specify the linkage method when an event occurs. Check one or more response
methods for the system when a motion detection alarm is triggered.
