TruVision 12/32 Series IP Camera Configuration Manual
9
Configuration menus
Description
2.
Network
Defines the network parameters required to access the camera over
the internet. See “Network settings” on page 12 for further information
on the setup.
3.
Video/Audio
Defines recording parameters.
4.
Image
Defines the image parameters, OSD settings, overlay text, and privacy
mask. See “
To configure ROI settings:
1. From the menu toolbar, click
Configuration
>
Video/Audio
>
ROI
.
2. Select the desired channel from the drop-down list.
3. Draw the region of interest on the image. Up to four
regions can be drawn.
4. Choose the stream type to set the ROI encoding.
5. Enable
Fixed Region
to manually configure the area.
Region No.
: Select the region.
ROI Level
: Choose the image quality enhancing level.
Region Name
: Set the desired region name.
6. Click
Save
to save changes.
Video image” on page 19 for further information on the setup.
5.
Security
Defines who can use the camera, their passwords and access
privileges, RTSP authentication, IP address filter, and telnet access.
6.
Events
Defines motion detection, tamper-proof, alarm input/output, exception,
and snapshot configuration.
7.
Storage
Defines recording schedule, storage management, and NAS
configuration.
Local configuration
Use the Local menu to manage the protocol type, live view performance and local
storage paths. In the Configuration panel, click
Local Configuration
to display the local
configuration window. See Figure 3 and Table 3 below for descriptions of the different
menu parameters.
