TruVision IP PTZ Camera FW 5.1 Configuration Manual
13
2. From the
Time Zone
drop-down menu (1), select the time zone that is the closest to
the camera’s location.
3. Under
Time Sync
(2), check one of the options for setting the time and date:
NTP
: Check the
NTP
enable box and enter the server NTP address to synchronize
with an NTP server. The time interval can be set from 1 to 10080 minutes.
- Or -
Manual Time Sync.
: Enable the
Manual Time Sync
function and then click
to
set the system time from the pop-up calendar.
Note
: You can also check the Sync with computer time checkbox to synchronize the
time of the camera with the time of your computer.
4. Check
Enable DST
(3) to enable the DST function, and set the date of the DST
period.
5. Click
Save
to save changes.
