TruVision IP PTZ Camera FW 5.1 Configuration Manual
17
To define the FTP parameters:
1. From the menu toolbar, click
Configuration
>
Network
>
FTP
.
2. Configure the FTP settings, including server address, port, user name, password,
directory structure, main directory, subdirectory, and upload type.
Directory:
In the Directory Structure field, you can select the root directory, main
directory and tab. When the main directory is selected, you have the option to use
the Device Name, Device Number or Device IP for the name of the directory. When
the tab is selected, you can use the Camera Name, Camera No., or Custom as the
name of the directory.
Upload type:
To enable uploading the snapshots to the FTP server.
3. Click
Save
to save changes.
To define the UPnP parameters:
1. Click
Configuration
>
Network
>
UPnP
.
4. Check the checkbox to enable the UPnP function. Edit the friendly name of the
device when detected online can be edited.
4. Click Save to save changes.
To set up the Email parameters:
1. In
Configuration
>
Network
>
.
2. Configure the following settings:
Sender:
The name of the email sender.
Sender’s Address:
The email address of the sender.
SMTP Server:
The SMTP Server IP address or host name.
SMTP Port:
The SMTP port. The default is 25.
Enable SSL:
Check the checkbox to enable SSL if it is required by the SMTP
server.
Attached Snapshot
: Check the checkbox of
Attached Snapshot
if you want to
send emails with attached alarm snapshots.
I
nterval:
This is the time between two actions of sending attached images.
Authentication
: If your email server requires authentication, check this checkbox to
use authentication to log in to this server. Enter the login user name and password.
Receiver:
The name of the user to be notified.
Receiver’s Address:
The email address of user to be notified.
3. Click
Save
to save changes.
To set up the NAT parameters:
1. Click
Configuration
>
Network
>
NAT
.
2. Check the checkbox to enable the NAT function.
