TruVision IP PTZ Camera FW 5.1 Configuration Manual
57
You can only call up the predefined presets. For instance, preset 99 is the “Start auto
scan”. If you call the preset 99, the camera starts auto scan function.
These predefined presets cannot be modified. You cannot set up new presets.
Table 9: Predefined preset settings
Special
Preset
Function
Special
Preset
Function
33
Auto flip
93
Set limit stops manually
34
Back to initial position
94
Remote reboot
35
Call preset tour 1
96
Stop a scan
36
Call preset tour 2
97
Start random scan
37
Call preset tour 3
98
Start frame scan
38
Call preset tour 4
99
Start auto scan
39
IR cut filter in
100
Start tilt scan
40
IR cut filter out
101
Start panorama scan
41
Call shadow tour 1
102
Call preset tour 5
42
Call shadow tour 2
103
Call preset tour 6
43
Call shadow tour 3
104
Call preset tour 7
44
Call shadow tour 4
105
Call preset tour 8
92
Start to set limit stops
To set a preset:
1. Select a preset number from the preset list.
2. Use the PTZ directional buttons to move the camera to the desired position.
3. Click
to finish the setting of the current preset.
4. You can click
to delete the preset.
