TruVision IP Compact PTZ Camera Configuration Manual
73
2. Use the PTZ directional buttons to move the camera to the desired position.
3. Click
to finish the setting of the current preset.
4. You can click
to delete the preset.
To call a preset:
1. Select a defined preset from the list.
2. Click
to call the preset.
Using preset tours
A preset tour is a memorized series of presets. The camera stays at a preset for a set
dwell time before moving on to the next preset. A preset tour can be configured with up
to 32 presets.
You can configure up to eight preset tours.
To set a preset tour:
1. In the PTZ control panel, click
to enter the tour settings interface.
2. Select a preset tour number from the drop-down list.
3. Click
to enter the adding interface of preset.
4. Configure the preset number, preset tour time, and preset tour speed.
Preset Tour Time
The dwell time. The length of time for which a camera stays at
a preset before moving to the next preset.
Preset Tour Speed
The speed the camera moves from one preset to another.
5. Click
OK
to save a preset into the preset tour.
6. Repeat the steps from 3 to 5 to add more presets.
To call a preset tour:
In the PTZ control panel, select a defined preset tour from the drop-down list and
click
to call the preset tour.
