TruVision Series 3 IP Camera FW3.1 Configuration Manual
37
Figure
9
: Motion detection menu
Defining a motion detection alarm requires the following tasks:
1.
Area settings
: Define the on-screen area that can trigger a motion detection
alarm and the detection sensitivity level.
2.
Arming schedule
: Define the schedule during which the system detects
motion.
3.
Recording schedule
: Define the schedule during which motion detection can
be recorded. See “Recording schedule” on page 50 for further information.
4.
Linkage
: Specify the method of response to the alarm.
In order to detect the moving objects accurately and to reduce the false alarm
rate, normal configuration and advanced configuration are selectable for different
motion detection environments.
To set up motion detection in normal mode:
1. Click
Configuration
>
Basic
Event
>
Motion Detection
.
2. Check the
Enable Motion Detection
box. Check
Enable Dynamic Analysis
for Motion
if you want to see where has motion real-time.
Note:
Select Disable for rules in local configuration menu if you don’t want the
detected objected displayed with the rectangles.
3. Select
Normal
mode from the drop down menu.
4. Click
Draw Area
. Click and drag the mouse on the live video image to draw
an area sensitive to motion detection.
5. Click
Stop Drawing
to finish drawing. Click
Clear All
to delete all areas
marked and restart drawing.
