background image

Installation Guide 

13 

interference in which case the user will be required to correct the 

interference at his own expense.

 

ACMA compliance 

Notice! This is a Class A product. In a domestic environment this 

product may cau

se radio interference in which case the user may 

be required to take adequate measures.

 

Canada 

This Class A digital apparatus complies with Canadian ICES

-003.  

Cet appareil numérique de la classe A est conforme à la norme 

NMB

-0330 du Canada.

 

European Union directives: 

12004/108/CE (EMC directive): 

Hereby, UTC Fire & Security declares 

that this device is in compliance with the essential requirements and 

other relevant provisions of Directive 2004/108/EC.

 

 

2012/19/EU (WEEE directive): 

Products marked 

with this symbol cannot be disposed of as 

unsorted municipal waste in the European Union. 

For proper recycling, return this product to your 

local supplier upon the purchase of equivalent new 

equipment, or dispose of it at designated collect

ion 

points. For more information see: 

www.recyclethis

.info.

 

Contact information: 

For contact information, see www.interlogix.com or 

www.utcfssecurityproducts.eu

 

Summary of Contents for TVD-2202

















Reviews: