Chapter 5: Advanced setup
TruVision DVR 10 User Manual
69
week to which you want to copy this schedule. Select All if the same schedule
is used all week. Click Copy.
4. Click Confirm to save your settings and return to the Alarms screen.
5. Copy the alarm output settings to another alarm output if required.
To copy the settings to another alarm output, select an alarm output on the
Copy to Alarm Out list box then click Copy. A confirmation message displays.
Select OK to accept.
6. Click Confirm on the Alarms screen to save your alarm output settings.
Note:
The TVR 10 will prompt you to reboot in order for the schedule to take
effect.
Notifications
Notifications refer to internal errors that occur within the system. Table 18 below
provides a list of these exceptions.
Table 18: List of exceptions
Condition
When alarm occurs
HDD full
Hard drives are full. Notification only occurs if you disable overwrite.
Hard disk error
An error occurred in the hard drive.
Illegal access
Log on failed on the unit.
IP address conflict
Two devices on the network have the same IP address.
Network failure
Network connection was lost.
NTSC/PAL mismatch
The input and output have a different video format.
Use the Notification screen (displayed in Figure 26 on page 70) to define how
you want to be notified of these exceptions. To display the Notification screen,
click Notification Setup on the Alarms screen.
Summary of Contents for TVR-1004-1T
